Welcome: Dongguan Hop Skip & Jump co.,ltd
lily@hopskip-jump.com 86-13712404698

Chemours Teflon FEP 9835 (9835X) Fluoroplastic resin

For inventory control purposes, product name may be followed by an X.

Products labeled FEP 9835 and FEP 9835 X are equivalent, and all information in this document is applicable to both.

Typical Applications
Applications for Teflon™ FEP 9835 include small diameter, thin wall wire and cable insulation; industrial film; and intricate or thin wall parts made by injection molding.

EMAIL

  • For inventory control purposes, product name may be followed by an X.

    Products labeled FEP 9835 and FEP 9835 X are equivalent, and all information in this document is applicable to both.

    Typical Applications
    Applications for Teflon™ FEP 9835 include small diameter, thin wall wire and cable insulation; industrial film; and intricate or thin wall parts made by injection molding.

    Description
    Teflon™ FEP 9835 is a melt-processible fluoroplastic resin available in pellet form. It is a copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of ASTM D 2116 Type II. With a relatively high melt flow rate and excellent electrical properties, Teflon™ FEP 9835
    has been specifically designed for high-speed extrusion of thin coatings on small-gauge wires for twisted-pair constructions. Table 1 shows the typical property data for Teflon™ FEP 9835.

    As shown in Table 1, this resin provides the electrical and mechanical properties needed for low voltage applications. In addition, Teflon™ FEP 9835 has a higher melt flow rate than most other fluoroplastic resins. This permits higher extrusion speeds and easier processing, making Teflon™ FEP 9835 a cost-effective alternative for producing thin-wall extrusions.

    Teflon™ FEP 9835 is designed and made to have improved adhesion to copper wire under specific wireline process conditions, low dissipation factor at high frequencies, and significant plate-out resistance in melt extrusion. It is suitable as a solid insulator and as a foamed insulator, when used with an appropriate nucleant in a nitrogen gas injection process.

    Teflon™ FEP 9835 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon™ FEP 9835 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon™ FEP 9835 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.

    Properly processed products made from neat Teflon™ FEP 9835 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat

INQUIRY